John Deere 5065 E Features and specifications
The John Deere 5065 E is a 65 hp category utility tractor from John Deere. the John Deere always gives a reliable product to the consumers. there is a lot of utility tractor available in the market like Kubota M6060, Deutz Fahr Agrolux 65, Mahindra 6065, the utility tractor fulfill the requirement of the farmers. the utility tractor capable to do a lot of works.
Final Tier 4-compliant PowerTech
The 5065E Utility Tractors meet U.S. Environmental Protection Agency (EPA) Final Tier 4 (FT4) exhaust emissions regulations with a diesel oxidation catalyst (DOC)/diesel particulate filter (DPF) system. Modifying the after-treatment device resulted in better forward and side visibility around the hood. The hood slope of the updated design is comparable to the Tier 2 tractors previously produced. Similar to the system on the 5M, the purpose of the DOC/DPF combination is to reduce toxic gases emitted from the exhaust, as well as to filter particulate matter to prevent it from becoming airborne
(PTO) power take-off
The 540/540 economy PTO allows operators to select the engine rpm for reduced fuel consumption, reduced noise levels, reduced vibration, and less wear and tear on the engine, while at the same time keeping the proper 540 rpm at the PTO.
The economy PTO provides 540 rpm to the PTO at 1600 engine rpm. The 540 economy mode is ideal for any PTO application, from running a mower-conditioner to a baler or a cutter, where full engine horsepower is not required.
For heavy-duty operations requiring maximum PTO power, the PTO shift lever is placed in the 540 position, the PTO is engaged, and the engine is run at a rated speed of 2100 rpm. This selection gives 540 rpm to the PTO shaft and delivers the fully advertised horsepower at rated engine speed.
The John Deere-built PowrReverser transmission provides 12 forward and 12 reverse gears for operators requiring additional flexibility for multiple applications. It comes standard with shiftable 540/540 Economy power take-off (PTO) and electronically activated, telescoping draft links. This transmission is ideal for operators using their tractors to perform in versatile applications
Nine forward and three reverse (9F/3R) speeds are achieved by using two platform-mounted levers for shift operation. The gear lever at the operator’s right hand selects one of three forward gears and one reverse gear, as well as the integrated park position. The range lever at the operator’s left hand selects collar-shift A, B, and C ranges.
Operators can easily switch directions without having to completely stop the tractor with synchronized, in-line, shuttle-shift capability between forward and reverse gears on the gear-shift lever in all three ranges (A, B, and C ranges).
The specifications of John Deere 5065 E
|Description||John Deere PowerTech 3029|
|Cylinders liners||Wet sleeved|
|Displacement||3 cylinders: 2.9 L
179 cu in.
|Rated power||At 2100 rpm: 49.9 kW
|Rated PTO power (hp SAE)||At 2100 rpm: 36.5 kW
49 PTO hp
|Type||Standard: 9F/3R SyncShuttle
Optional: 12F/12R PowrReverser
|Clutch; wet/dry||Dry on 9F/3R SyncShuttle
Wet on 12F/12R PowrReverser
|Creeper||Option on 9F/3R transmission models|
|Pump rated output||Standard: 68.9 L/min
|Available flow at a single rear SCV||43.1 L/min
|Joystick SCV control||2WD: FIK
Rear power take-off (PTO)
|Type||Standard: Independent 540
Optional: Independent 540E (12×12)
|PTO actuation||Mechanical (lever on 9×3)
Electrohydraulic with wet clutch (12×12)
|Wheelbase||2WD and MFWD: 2050 mm
|Approximate shipping weight, Open;Cab||MFWD: Open: 2550 kg
Cab: 3250 kg
|Front||2WD: 7.5-16 R1
MFWD: 9.5-24 R1
|Rear||2WD: 16.9-28 R1
MFWD: 16.9-28 R1
|Turning radius with brakes||2WD: 3.1 m
|Turning radius without brakes||2WD: 3.5 ft
11.5 ft, in.