Case Utility Farmall 50 A full specification

Published by team tractorstown on

Utility tractor Case Farmall 50 A

The Case is one of the most reliable tractor brand. The Utility Farmall 50 A full fill all requirements of the farmer. this is 53 hp utility tractor from Case, in range of 50 to 54 hp utility tractor. check some other utility tractor EX. New Holland workmaster, Deutz Fahr Agrolux 65, Mahindra 6065 2 WD, Zetor UTILIX HT 45.

The feature of Farmall 50 A

Power and Performance

A turbocharged, electronically controlled 2.2L engine features 3 cylinders and a tunnel block design that ensures ruggedness and easy maintenance without sacrificing power, efficiency or performance. Three available models range from 53 hp.

 

Transmission

*Easy to Shift, Easy to Operate transmission
Utility Farmall A tractors feature a simple, straightforward 8×8 mechanical transmission that’s easy to operate. On-the-fly shifting makes getting your work done easier.

*Mechanical Shuttle With Synchro Shift
The mechanical synchro-shuttle provides easier shuttling and decreased cycle time during loader applications and greater reverse speed choices. That means greater, more-responsive maneuverability and increased flexibility.

PTO

A 540 rpm rear PTO comes standard or choose a 540/540E PTO option for greater fuel efficiency during less-demanding applications.

Mounting

When you order your Utility Farmall A series tractor with the complete loader-ready option, it arrives with the appropriate loader-mounting brackets, two mid-mount hydraulic valves, in-cab joystick and a front grill guard already in place. This convenience package lets you install and remove your loader in minutes.

Easy to maintain

A single-piece hood opens without tools. Gas struts support the hood when open for quick, easy access to engine components and checkpoints. Fueling is fast and easy with fuel-tank access from the ground or from the operator platform.
Check and fill engine oil without opening the hood. A 300-hour oil-change interval reduces downtime and maximizes uptime.

 

The specification of Farmall 50 A

ENGINE

Type 3-cylinder, FPT turbocharged & aftercooled
Displacement 2.2 L (135.9 cu. in.)
Gross Engine HP 53 @ 2,700 rpm
PTO HP 45
Emissions Tier 4 B/Final
Emissions Treatment
Internal exhaust gas recirculation (EGR) with diesel oxidation catalyst (DOC) and maintenance
– free particulate matter catalyst
Fuel System Electronic high pressure common rail
Fuel Capacity 3 gal. (49 L) capacity
Alternator 75 amp

 

TRANSMISSION

Type
8F×8R mechanical shuttle, dry clutch

 

PTO (POWER TAKE OFF)

Standard PTO SPEED 540 @ 2,575 engine rpm
Optional PTO SPEED 540E (540 PTO RPM @ 2,016 engine rpm)

 

HYDRAULICS

Lift Capacity @ 24 in. Behind Pins
2,701 lbs. (1
225 kg), with telescopic lower links and stabilizers; Cat II
System Type Open center
Pump Type Engine driven dual gear-type
Base Mid-Mount Remotes
(Standard/Optional)
0/2 with loader – ready factory option
Base Rear Remotes
(Standard/Optional)
1/2
Main Pump Flow
11.9 gpm (45L/min)
Steering Pump Flow
5.5 gpm (21L/min)

 

TIRES

2WD
R1 (Bar Tread)
Front: 7.5×16 6PR
/ Rear: 13.6×28 6PR
WD
R1 (Bar Tread)
Front: 8.3×24 6PR
/ Rear: 13.6×28 6PR
4WD
R4 (Industrial Tread)
Front: 12.5×18 6PR/ Rear: 18.4×24 6PR
Categories: Tractor

1 Comment

Bhanu · at

Nice article
Good job man

Leave a Reply

Your email address will not be published. Required fields are marked *